150-ton Minster "Piece-Maker" Back Geared Straight Side Press Model P2-150-60 For Sale, Year 1996 - Includes Coil Feed Line

150-ton Minster "Piece-Maker" Back Geared Straight Side Press Model P2-150-60 For Sale, Year 1996 - Includes Coil Feed Line

Name: 150-ton Minster "Piece-Maker" Back Geared Straight Side Press Model P2-150-60 For Sale, Year 1996 - Includes Coil Feed Line
Brand: MINSTER
SKU: 3038
Availability: InStock

Type

Presses, Straight Side, Double Crank (Single Action)

Brand

MINSTER

Model

P2-150-60 Piece-Maker

Year

1996

Stock #

3038

Condition

Used

Request a Quote

More 100-150 ton presses

Let's Talk

Specifications
Tonnage	150
Stroke	5 inches
Shut Height	29.5 inches
Adjustment	5.5 inches
Bed Size	60" x 40"
Ram Area	60" x 40"
SPM	45-120 VSPM
150-ton Minster P2-150-60 Geared Press For Sale "Piece-Maker" Straight Side Metal Stamping Press Includes Fully integrated Minster 10,000 lbs. x 20" Servo Coil Feed Line Year 1996 - Can be Seen Under Power! Standard Press Specifications Minster Press Serial Number P2-28672 Geared 150-ton Capacity 5" Stroke 29.5" Shut Height on Bed (SDAU) 23.5" Shut Height on Bolster (SDAU) 5.5" Motorized Adjustment 60" LR x 40" FB Bed Area 60" LR x 40" FB Slide Area 45-120 Variable Stroke Per Minute Equipment and Features Minster Combination Pneumatic Clutch and Brake Air Counterbalances Minster Monitor Flow Lubrications System Single Geared Air Operated Flywheel Brake Two Point Eccentric Shaft Eight adjustable bronze gibs T-Slotted Ram 25 HP, 1800 RPM, 60 Cycle Main Motor Hydraulic Tie Rod Nuts Press Controls Include: Toledo Transducer PW4 Load Analyzer with four (4) strain links mounted on uprights Allen Bradley PLC-5/30 programmable controller Allen Bradley "Panel View" operator interface for the press and ancillary equipment Tool storage (8 digit number) for 50 tools. Limit switch settings stored with tool number. Automatic press shut height and speed (SPM) adjustment set from tool number. All feed parameters including feed length, feed timing to press stroke, material acceleration, stock guide width, and material pass line setting set from tool number. Straightener work roll and stock guide settings set from tool number. Programming of die protection inputs (8 channels) to match die sensing for tool number Programming of parts counters for tool numbers. Programming of auxiliary equipment timing to press stroke such as air blowoffs, spray lubrication, and die functions. Operator prompting and diagnostic capability. Controls die clamping. 6" Thick Bolster Plate 20" Wide Windows Floor Standing with Vibro-Dynamic Floor Pads Minster Conventional Coil Feed Line Specifications: 10,000 lbs. Coil Weight Capacity (per side) 20" Maximum Coil Width .110" Capacity at Full Material Width .020" Minimum Thickness Material .200" Maximum Thickness at 5" Width 20"-24" Coil I.D. Range 60" Maximum Coil O.D. Left to Right Feed Direction 60-600 IPM Line Speed Minster Conventional Coil Feed Line Equipment and Features: Minster Pull Off Double End Coil Reel Model# MR10-20D, SN/ 13-70353 Three leaf mandrel coil reel per side Coil reel keeper arms Hydraulic mandrel expansion Air drag brakes mounted on main coil reel spindles Outboard air regulators for drag brake adjustments Hydraulic threading drives for jog forward and reverse Hydraulic operated coil hold down arms Motorized coil hold down arm end wheels Air operated turret locking pin Hydraulic turret rotation Self Contained Hydraulic Unit Minster Powered Coil Straightener Model# MS20-20-7, SN/ 13-50301 Entry and exit powered coil straightener pinch rolls with air operated adjustment Outboard air regulator for upper powered coil straightener pinch roll air pressure adjustment Seven coil straightening rolls x 2" diameter 3.3" Diameter Air Actuated Pinch Rolls Hydraulic upper straightener roll adjustments Digital upper straightening roll depth displays Motorized Stock Guide Adjustment with Digital Readout Inclined powered coil straightening head Cascade loop support section Auto lubrication system Variable speed powered coil straightener drive Common operator's control station for coil reel and powered straightener functions Jog forward and reverse Auto / Run cycle Loop control 480 Volt Minster Threading Table Model# MTT8-26S, SN/ 13-81111 Air Actuated Length of Table 8' Long Single Side - Bombay door style Ultrasonic Loop Control Sensor Minster Servo Roll Feed Model# MEF4-20, SN/ 18-50554 4 inch diameter upper and lower servo feed rolls 48"-57" Pass Line Range Air operated upper servo feed roll lift / pilot release Cascade loop - material support rollers End Of Stock Detector Hydraulic Pass Line Mounting Clamps Cabinet mounted with Motorized Pass Line Adjustment Motorized Adjustable stock width edge guides AC servo roll feed drive and controls Job memory micro adjust batch count etc (Consult sales for complete details) Free standing sloped front servo roll feed control console Remote pendant control for jog forward and reverse Fused disconnect This 1996 150-ton Minster P2-150-60 "Piece-Maker" straight side stamping press offers a complete, production-ready solution featuring a fully integrated Minster 10,000 lbs. x 20" servo coil feed line. Built for precision and efficiency, the single-geared press delivers a 5" stroke, variable speeds from 45–120 SPM, and a 60" x 40" bed area with an 8-point gibbing system. The system's fully integrated Allen-Bradley PLC controls store up to 50 tool programs, automatically adjusting shut height, SPM, and all feed parameters. The feed line includes a Minster MR10-20D double-end coil reel, an MS20-20-7 powered straightener, an 8' threading table, and an MEF4-20 AC servo roll feed. Available to be seen under power, this heavy-duty, floor-standing system is ideal for high-precision progressive die applications.

Attachments
There are no files attached to this listing currently. If you have any further questions regarding this listing, please contact us for more information.

Machine Tags
Used Minster Press For Sale, Minster High Speed Press For Sale, Minster Mechanical Press, Straight Side Double Crank Press, Minster Back Geared Press For Sale, Minster Piecemaker Press

150-ton Minster "Piece-Maker" Back Geared Straight Side Press Model P2-150-60 For Sale, Year 1996 - Includes Coil Feed Line

Category