30" Mecon Cabinet Mounted Servo Feed, Model #600F301 with Updated Siemens Controls in 2021!

Standard Specifications
Mecon Servo Roll Feed
Model # 600F301
30" Maximum Coil Width
.340" Maximum Coil Thickness
Cabinet Mounted
Dual air pressure pinch roll system
Full Pilot Release of pinch rolls
Feed Rolls are hardened, precision ground, surface treated and chrome coated for a hard, high friction surface.
Rolls are supported by precision, permanently sealed and lubricated ball bearings.
Free standing Console Controls

Updated Siemens Roll Feed Control Package by Nidec CHS in 2021
 
• SIMOTION Control platform with touch screen HMI
Servo motor power cable & servo motor feedback cable 10-meter length

Full operator’s manuals and electrical schematics
Remote pendant for jog forward and reverse
All other hard button/switch functions are optional at an additional cost

SIMO-450 AC Brushless Servo Control Package Specifications:

Drive size .................................................................................................................. 450 Inch / Lbs.
Voltage.....................................................................................................................................480 V
Control voltage...........................................................................................................................24 V
Max feed length ....................................................................................................... 999.999 Inches
Accuracy at motor output shaft within ................................................................... +/- 0.001 Inches
Material feed accuracy within ...................................................................................... 0.003 Inches
Job memory ................................................................................................................................ 200

Standard Features:
• Operating modes (Parameter, Manual, Automatic, Setup)
• Press before feed (single stroke, continuous stroke)
• Emergency stop (hard button)
• Product counter
• Clear text diagnostics including fault log
• I/O status
• Production Data:
 - Feed angle utilization as %
 - Motor torque as a percentage
 - Strokes per minute
 - Average line speed (FPM)
 - Micro-adjust on the fly
 - Upper feed roll pilot and lift (Manual/Auto)

• Data management for 200 products:
- Feed length
- Speed
- Acceleration / Deceleration
- Piece counter / Batch counter
- Reset product counter, piece counter
- Communication (with preparation)
- Ethernet IP / PROFINET

The console cabinet is a NEMA 12 enclosure with fusible disconnect. The feed will require one
pole or two-24V DC signal from and the press rotary cam switch for automatic feed initiate and
pilot pin release.

Rebuilt and Siemens Controls Upgraded Mecon Servo Roll Feed For Sale

Mecon coil feed equipment.